News

We are delighted to invite you to our exclusive Technology Days, where we will be presenting our latest aerosol can production line – equipped with a state-of-the-art generation 4.0 digital printing machine that has already set new standards in printing technology.

We are delighted to invite you to our special customer event. Join us as we present our two new buildings and discover the latest machines and production lines live.

Today Hinterkopf is a family business that is run by the second generation and the third generation is already onboard and very committed. 

We look back on the last few days of the trade fair in Paris with pleasure and would like to thank you for the valuable experiences and the opportunity to meet both familiar and new customers in person. The trade fair provided an inspiring platform for exchanging ideas and deepening business relationships.

To be followed by: Technology Days at Hinterkopf GmbH in Eislingen with many highlights

We cordially invite you to visit us at the Paris Packaging Week on 17 and 18 January 2024. This year we have booked not one but two booths so that we will be able to present all our highlights to you.

After intense development work, we present the fourth generation of our digital printing machine. Higher resolution and a significantly increased production speed broaden the options of this efficient technology even further. Another benefit: the Heat-Free Decorating System for minimized energy consumption.

Light, unbreakable and sustainable - with its aluminum bottles, Hinterkopf brings a breath of fresh air to the wine scene. The 250ml packaging is easy to transport and allows special moments of pleasure anytime and anywhere.

No sooner than the METPACK trade fair in Essen is over, our next highlight is on the horizon. From June 12th to 16th we will once again be holding our Technology Days at our headquarters in Eislingen. You are cordially invited!

You are cordially invited to visit us at this year's METPACK in Essen. At our booth we present two of our impressive innovations live.

Paris Packaging Week now lies behind us. Once again, the personal discussions with you were a real added value for our company.

A year full of major transitions and changes is coming to an end. Not all challenges have been met immediately and easily and some solutions are yet to be found over the next year.

Winner of the Can of the Year 2022 competition, which is backed by The Canmaker magazine, is a digitally-printed beverage can produced by NOMOQ, a Swiss-based distributor of containers and service provider to the craft beer sector.

Experience generation 4.0 of our digital presses live! We print on site with seven colours as well as with matt and lacquer effects.  Convince yourself of the unique print result.

In a few weeks’ time the traditional Aerosol und Dispensing Forum is taking place again in Paris. Finally we will be able to meet again in person. That’s why we warmly invite you to visit us at our booth in exhibition hall 7.

With the brand new D480.2, Hinterkopf presents already it’s fourth generation of digital printing systems. The innovative concepts is based on over 10 years of proven technology, and offers customers a vastly expanded range of possibilities in decoration of packaging – translucent colors, gloss or barrier coatings to name only a few. The design teams at Hinterkopf have incorporated classic analog stations to the otherwise fully digital printing system.

Without a doubt, sustainability is at the center of discussion on many levels, today and for sure also in the future. Our digital printing solutions, ranging from D120 to D240.2 and D360.3 offer players in the packaging industry for already over 10 years the resource and energy efficient production of tubes, aerosol cans, bottles, cartridges and other cylindrical hollow containers from aluminum or plastic.

In order to further expand its production capacities and capabilities, and to further improve production efficiencies, the Alltub Group will install two new aluminium tube production lines and a new laminate tube printing machine at its plants in Italy and Germany in 2021. Though sharing a common platform, the requirements of the two aluminium tube lines differ significantly from each other, underlining the high flexibility of the plants and the production lines from Hinterkopf.

Digital printing provides the perfect solution for economical decoration of small production lots. Printing machines such as the D240.2 by Hinterkopf allow to send artwork directly from the creative computer to the printer. There are no printing plates or change-over delays, and virtually zero waste to consider. Those are some of the advantages which make this technology ever more attractive to the world of craft beer.

Highly versatile in-line finishing machine for tubes from aluminum or plastic, with the widest array of caps and closures. Impressive speeds of up to 300 tubes per minute.

A total of 14 digital printing machines made by Hinterkopf are in operation today across the globe, producing a grand total of 1 million packaging containers each day, with an amazing daily 250 different graphics. Applications range from aerosol cans to beverage cans for craft beverages, also tubes as well as cartridges – the variety in cylindrical hollow containers is nearly endless.

The brand-new transfer machine H210 combines the best features of its tried and tested sisters H200 and H240. Several hundred of these two classic machine lines are operation around the globe. The latest generation H210 is ready for almost anything: decoration of cans, tubes, bottles and other cylindrical hollow container, regardless if made from aluminum or plastic, in the widest range of shapes and sizes. At a maximum speed up to 210 cycles per minute you can rely on proven technology. 

An unusual sight even at our factory in Eislingen/Germany. A line-up of three new types of necking machines (N50.3, N45.5, N40.4XL), production ready and awaiting delivery to their respective new international customers. What an impressive image of concentrated power, as shown in these pictures.

A total of 12 digital printing machines made by Hinterkopf are currently in production and have decorated a total of over 350 million containers. Every day over a million containers are added to that grand total. Four of those machines are dedicated to the decoration of beverage cans.   

We are extending the in-house technology showcase for individual appointments

Due to overwhelming interest in our latest technology highlights, we are extending the in-house technology showcase. Originally running during the month of September 2020, we are extending this successful event for the second time for additional individual appointments at our factory in Eislingen/Germany for an additional two weeks until October 23, 2020.

The plan was to reveal our next world innovation at this year‘s Metpack. The Covid-19 crisis made this impossible, which is why we are excited to present this innovation online.

Declining consumer confidence is one of the reasons why a growing number of producers of tubes, cans and cartridges made from aluminum or plastics prefer smaller manufacturing lot sizes. Cost efficient decoration of small lots is made possible with the D240 digital printer made by Hinterkopf.

Mátrametál, based in Hungary and with its 350 employees, has a history of over 50 years. The core competence of Mátrametál is the manfacture of tubes and cans made from aluminum. Operating successfully in the international sphere, Mátrametál sells its products on a worldwide basis into 33 countries. A total of five up-to-date production lines are producing over 85 million cans anually.

Leading brands from personal care and food trust DS Containers, and Hinterkopf GmbH is proud to be a partner in this innovative project.

Please visit out factory in Eislingen/Germany between March 10 – 12, and witness live the start of operation for the very first impact extrusion press made by Hinterkopf.

This colorful assortment of plastic tubes was recently decorated with the latest generation digital printer D240.2. In February 24 differently designed tubes will be delivered to our customers. Experience the incredible print quality.

Only a few more weeks before the traditional Aerosol Forum will open its doors in Paris/France. You are cordially invited to meet us at our booth in hall 7.

Experience the newest generation digital printer D240.2 live! We are digitally decorating on site: get a close up look at the incredible print quality.

Cannex & Fillex trade show and conference for the can making and filling industries took place at Colorado Convention Center in Denver from May 1 – 3, 2019. Numerous attendees and over 80 international exhibitors engaged in comprehensive conversations. Aside from a wide array of exhibits, visitors as well as exhibitors participated in the concurrent technical conference, covering the pertinent current topics of the industry.

At the beginning of 2020 a line-up of three digital printing machines by Hinterkopf reached a significant milestone: 300 million containers produced, which marks a record setting performance.

Effective end of last year, Eislingen/Germany based Hinterkopf GmbH took over exclusive license for the manufacture and sales of series XS and XL impact extrusion presses from Schuler Pressen GmbH for the packaging industry. This was exciting news for many industry experts and visitors. Several in-depth conversations resulted in specific requests for this technology offering. The strategic acquisition enables Hinterkopf to offer complete production lines to the industry.

The weight of aluminum beverage cans has been continously reduced over the past years. 60 years ago, the first beverage cans had a weight of approximately 80 grams (80g). Today, beverage cans with volume of 330ml or 12oz. barely weigh 13g. A similar development can be observed in aerosol cans. Manufacturers apply lots of effort to optimize raw material usage.

The center of attention at this year’s Aerosol Forum in Shanghai clearly was the D240.2, the next generation digital printing machine. It comes with more precision, higher speed and a compact size, compared to it’s predecessor. The latest generation D240 has already sold six times. Just recently the first D240.2 went into operation at BAOWU Steel in China.

Reacting with speed and flexibility to changing market demands: an increasingly important ability for suppliers of metal and plastic packaging. Technical solutions which enable this agility are attracting more and more attention.

Ball Corporation completed the factory acceptance of their new aerosol can production line at the factory in Eislingen in November 2017. Ball Corp., founded in 1880 as Ball Brothers Glass Manufacturing Company, is currently the largest manufacturer worldwide for aluminum cans, with headquarters in Broomfield, Colorado (USA). The new can line is planned to start production by the end of February at the Ball factory location in San Luis Potosi in Mexico.

14.-16. November 2017, Hall 6, Booth 456 & 174

With the newest generation D240.2 we have further optimized our industry leading digital printing machine - it's more compact in size, shows even more impressive performance and higher print fidelity. Experience unique print results!

Technology packed in Hinterkopf D240 digital printing machine allows packaging companies to respond swiftly and with flexibility to changing market demands. Networking of multiple machines enables the production of very large quantities of cosistently high quality packaging. The machine also allows extremely small orders and individually designed packaging to be produced with optimum economics. It doesn’t come as a surprise that within a short time the innovative D240 has become Hinterkopf’s best seller. 

An eventful trade show is behind us, and it exceeded our already expectations by far. We want to express our sincere gratitude to the many international visitors with whom we had most constructive and inspiring conversations.

This year’s primary focus of attention were the three machines on display: 

We would like to cordially invite you to this year’s Metpack show in Essen. At our booth, highest performance meets optimum resource efficiency for production of breathtaking cans. Our highlights in particular: 

The first of two A212 capping machines will be delivered to Argo Group, based in Greece. For almost 50 years Argo develops and manufactures plastic containers.

Laser replaces knives: The new L240 by Hinterkopf applies a non-contacting laser technology in the precision trimming of aluminum cans...

Experience the brand new D240 digital printing live! Printing right in front of you at our booth. Convince yourself of the unique print results.

Hinterkopf and Nussbaum set new benchmark in can manufacturing.

The digital printing technology of the D240 by Hinterkopf paved the way to an even more resource efficient decoration of cartridges beginning in spring of 2015.

More than 30 machines sold are proof.